1.2mm pitch wire to board connector – Easy termination

1.2mm pitch wire to board connector

GradConn’s new 1.2mm pitch wire to board connector range offers mated height of 1.45mm above the PCB.  Its mating orientation makes it suitable for designs where space is at a premium.

Available in 2 – 6 positions, horizontal PCB headers are polarised to avoid mis-mating, housings and headers are plugged together from above, which is easier for operators and allows mating in applications where a traditional end-to-end mating may not fit.   Examples of applications are Solid state lighting, notebooks and GPS.

To prevent mismating, the housing polarising ‘rib’ allows mating with header only in the correct orientation. The mating connectors lock together with an audible click, which aids assembly.

Gold plated contacts are rated at 1.5A for mating headers and sockets terminated with 28AWG diameter cable .  WB06-DA has an operating temperature range of -25°C to 85°C and is packaged in tape and reel.

Cable assemblies are available to suit your design, including connector types from other manufacturers at the other end of the assembly.   Build  a custom cable assembly using the cable builder tool.

Go to www.gradconn.com to download drawings, 3d models and specifications.

If you require any help or design advice on 1.2mm pitch wire to board connector contact GradConn.

Leave a Reply